Fuel System Cleaner 01.02

The Fuel System Cleaner removes operationally caused contamination in the entire fuel system, from the tank to the Combustion chambers. It removes resin and stickiness the carburetor and injection nozzle areas and removes further carbon residues and soot deposits within the entire upper cylinder area. Humidity and condensation is also eliminated in the complete fuel system and the product lubricates and protects the upper cylinder area.

Area of application

Motor vehicles, motorcycles and other high performance engines (e.g. ships and boats, Go-Karts, racing motors, lawn mowers, etc.)

Application

The Fuel System Cleaner is given into the fuel tank. On the occasion of difficult cases, cleaning should be carried out by using the product directly on the surface to be cleaned.

Note:
If spilled onto paintwork surfaces rinse off immediately with clean water.
Fuel System Cleaner is not a fuel back-up!
The Fuel System Cleaner is burnt together with the fuel and is ejected through the exaust system.

Consumption
300 ml for passenger cars

Reaction time
Works during operation

Technical data
Physical state: liquid
Colour: red
Odour: aromatic
Initial boiling point and boiling range: 110 – 116 °C Flashpoint: -6.5 °C
Lower explosion limit: 0,6 Vol.-%
Upper explosion limit: 12 Vol.-%
Ignition temperature: > 200 °C
Vapour pressure (at 68 °F): 20 hPa
Density at 68 °F: 0.78-0.82 g/cm3
Water resistant
Insusceptible to Frost

Product Information

Produktinformation

Fuel System Cleaner

Product properties

Available sizes

300ml

Item no. PU 01.02 24